Basement Waterproofing Membrane
In order to make our installation work as easy and professional as possible, we have six key points that can be of great help to help you install your waterproofing and waterproofing system less easily and get the best out of your way. Install it.
Although the installation of insulating and insulating roofs requires more experience than theory requires,
However, knowing tips on this may be useful.
bestseller Basement Waterproofing Membrane in the world
Waterproofing Membrane price
The most important point for installing a rubble before installing:
The most important thing about roof tiling and the fact that this ruber is able to last for a long time and does not fail is related to the ruber and its gender. It should be kept in mind that the used ruberoid must be a standard marker and, in terms of quality, a good and acceptable grade. No matter how good the installation is done, there is a good quality waterproofing, if the quality of the used insulating material is low or not standard, we should wait for the damage and moisture insulation problems.
Air temperature during installation:
The installation of low temperature insulation is difficult and does not fit properly, so it is better to install the insulation on dry days with relatively warm air.
The worst time to install a rubble in rainy and snowy days.
Leading brands in Waterproofing Membrane industry
Wall and roof surface conditions:
It should be noted that the lower surface of the waterproofing is highly dependent on its strength and durability.
You should know that the rubble does not stick well on metal and ceramic or wooden surfaces and it will be laced for a long time and may cause damage. In the iron due to shrinkage and expansion in the wood due to corrosion and winding it and lacking sufficient strength and adhesion between the body and the protective layer of moisture insulation causes the layer to die out of the body. If you want to re-suture on the rubble, it is advisable to make or wound the aluminum or tin metal layer on the undercoat to improve the adhesion of the new ruber. Do not install the rubble on the ceramic tile or on the smooth surface in the bathrooms and bathrooms. It is better to install the rubble on the brick or on the wound plaster.
where to buy Basement Waterproofing Membrane product?
The best places to install a rubble:
The best place to install a waterproof surface is to impregnate with bitumen.
The surfaces that are previously bituminous or asphalt are the best place to stick to the rubble,
Because the bitumen in the bitumen is combined with the bitumen on the underside.
In cement and concrete environments, standard and durable insulations can last for years.
– How to prepare the level?
In order to install the rubble, the surface must be free from any dirt and dust and dirt, and also if the place is the roof, you must remove the coolers and all the foreign objects from the surface so that the installation of the insulating rubble is done without problems and completely Hand done. Also, be sure to put a few centimeters of each layer on the previous layer that is parallel to it and tighten so that the penetration of water and moisture from the Milano layers becomes impossible.
benefits in Basement Waterproofing
How to handle smoke and air ducts and exhaust pipes?
We must remember that the only way out of the water is from the roof of the gutters.
Therefore, the tilt of the roof must be adjusted so that all water from the rain is directed to the gutters. Also, the installation of the rubble should not be done in such a way as to deflect this path. Therefore, it is necessary to install the insulating material in parallel with the tilt path. In order to ensure that the water on the roof fully reaches the drains, they drain some of the rubble in the drainage area,
And tighten it firmly.
Also make sure the gutters do not get stuck with the insulation.
Heaters and Lavatory Pipes:
Insulate the heat insulation so that these pipes do not fit in the middle.
Then, instead of replacing the pipe on the insulation, cut it as a cross sign, and squeeze its additions onto the tube. You should also smear a vaporizer tube or bitumen pipe up to 15 cm in diameter so that the water penetrates from this place to zero.